Stock: In Stock
Model: Nozzle-Comp-V6 1.75-0.6
High quality and precision nozzle for V6 type fusers.Special features:Output tolerance: ±0.01mmConcentricity: 0.02Roughness: <= Ra 0.8High quality materialHigh precision productionStrict quality controlsThese nozzles perform the function of extrusion of melted plastic in 3D printing process. ..
2.75€
Ex Tax:2.27€
Stock: In Stock
Model: Nozzle-Comp-V6 1.75-0.8
High quality and precision nozzle for V6 type fusers. Special features:Output tolerance: ±0.01mmConcentricity: 0.02Roughness: <= Ra 0.8High quality materialHigh precision productionStrict quality controlsThese nozzles perform the function of extrusion of melted plastic in 3D printing process..
2.85€
Ex Tax:2.36€
Stock: In Stock
Model: Extender-Melt-zone
Fusion zone extender to increase hotend flow.It is installed between the heating block and the nozzle, simply and quickly, thus increasing the volumetric flow of your 3D printer, I can print faster.It achieves an increase in flow of 40% approximately.Material: plated copper.
..
6.99€
Ex Tax:5.78€
Stock: In Stock
Model: Nozzle-1.75-PlatedCopper-0.4
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
6.50€
Ex Tax:5.37€
Stock: In Stock
Model: Nozzle-1.75-PlatedCopper-0.6
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
6.50€
Ex Tax:5.37€
Stock: In Stock
Model: PT100-4wire
PT100 temperature sensor for high temperature and high accuracy, to be used in place of a thermistor or thermocouple. They are capable of measuring higher temperatures than thermistors (up to 400ºC), and are more accurate than thermistors and thermocouples in general.It can be used with Hotend V6 us..
13.99€
Ex Tax:11.56€
Out of Stock
Stock: Out of Stock
Model: SensorTemp-PT100
PT100 temperature sensor for high temperature and high accuracy, to be used in place of a thermistor or thermocouple. They are capable of measuring higher temperatures than thermistors (up to 300ºC), and are more accurate than thermistors and thermocouples in general.Note that this is not a thermist..
9.99€
Ex Tax:8.26€
Stock: In Stock
Model: SensorTemp-PT1000
High temperature PT1000 temperature sensor.They are capable of measuring higher temperatures than thermistors (up to 400-450ºC, compared to 300ºC for the thermistor), and are more accurate than thermistors and thermocouples in general.PT1000 sensors can directly replace your printer thermistors with..
11.45€
Ex Tax:9.46€
Recommended
Stock: In Stock
Model: Dual-Gears-5mm-ID-endurecida-niquel
Very high quality bondtech double pulley, they have been machined with extreme precision. The teeth are very sharp, which guarantees grip and does not slide easily.Made of hardened steel and then treated with nickel plating, which greatly improves the durability and reliability of the teeth.The bond..
14.99€
Ex Tax:12.39€
Stock: In Stock
Model: TBG-Air-LDO
TBG-Air LDO motor extruder, a smart, light and fast extruder.Features:V6 Version.Dual Gear drive, made if hardened steel..Large size drive gear greater grip force (20mm diameter): The entire internal main structure of the TBG-AIR extruder consists of three large gears. The huge gears and the super d..
93.50€
Ex Tax:77.27€
Stock: In Stock
Model: TBG-LDO-Motor-right
TBG-Lite LDO motor extruder, a smart, light and fast extruder.Features:Larger drive wheels, for increased filament grip: The entire internal main structure of the TBG Extruder consists of three large gears. The huge gears and the super dense teeth enable a better bite on the filament. More gripping ..
73.45€
Ex Tax:60.70€
Stock: In Stock
Model: TBG-S-NoMotor
TBG-S extruder: light weight, Small profile and Power filament grip.Features:Larger drive wheels, for increased filament grip: the internal main structure of teh TBGS Extruder consists of three large gears. The huge gears and the super dense teeth enable a better bite on the filament. More gripping ..
48.50€
Ex Tax:40.08€