-9 %
Discontinued
Stock: Discontinued
Model: MK2A-300x200
MK2b Heated Bed 300x200mm
The hot bed is responsible for heating the bottom of the 3D
printer, so that the pieces remain adhered during printing. Thus the
warping (parts bulge and come off during printing process) is
avoided.
More information:
http://reprap.org/wiki/PCB_Heat..
32.99€ 29.99€
Ex Tax:24.79€
-67 %
Stock: In Stock
Model: MK2B
The hot bed is responsible for heating the bottom of the 3D
printer, so that the pieces remain adhered during printing.Thus the
warping (parts bulge and come off during printing process) is
avoided.
More information:http://reprap.org/wiki/PCB_Heatbed
..
17.99€ 5.99€
Ex Tax:4.95€
-31 %
Stock: In Stock
Model: MK3-220x220-12v-C
Features similar to MK2, for 12 volts:Hot bed with 3 mm aluminum coreThe metal part is the upper print side and the black side is the lower side. It is recommended to insulate the bottom side with thermal insulationFor 12 volt sourceWith countersunk holes for screw head and With ready connectionThe ..
15.99€ 10.99€
Ex Tax:9.08€
-39 %
Stock: In Stock
Model: MK7-ID8
These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. 8mm inner diameter for use with planetary gear motor. Nominal measures: Inner diameter 8mm External diameter 12.64mm Effective diameter 10.8mm ap..
4.49€ 2.75€
Ex Tax:2.27€
Only a few units in stock
-63 %
Stock: In Stock
Model: Mk8-300
These precision pulleys are designed especially for the extrusion
of the filament, its tiny teeth always guarantee a steady grip.
Material: stainless steel ..
3.49€ 1.30€
Ex Tax:1.07€
-13 %
Out of Stock
Stock: Out of Stock
Model: Sgen_L-MKS
Version V2.0MKS SGEN_L V2.0 es una potente placa de control de impresora 3D de 32 bits.CPU LPC1769 120MHZ de alta frecuencia y más velocidad de procesamientoEEPROM 4KB integradaConexión para eje Z dualCompatible con 12 V y 24VAdmite el modo UART, SPI y STEP / DIR.For more information click here...
38.00€ 33.00€
Ex Tax:27.27€
FLASH
-26 %
Stock: In Stock
Model: 36HS1718
Features:Nema14 motor, small in size, light in weight and high in quality.High temperature resistant.Long service life, up to 30,000 hours.Step Angle: 1.8±5%/StepCurrent: 1.88A/PHASENumber of teeth: 10 teethWeight: 83gSize: about 51x36x23mmLead wire length: 4CM/1.57inExtension cable: 70cm1 piece&nbs..
13.50€ 9.99€
Ex Tax:8.26€
-71 %
Stock: In Stock
Model: P3Steel Dual HTA3D HardwareSet
Dual P3Steel by HTA3D Nuts and Bolts:
Screws:
M3x8 - 21 units
M3x12 - 69 units
M3x16 - 9 units
M3x20 - 8 units
M3x25 - 12 units
M3x30 - 4 units + 1 fully threaded
M3x35 - 4 units (with spring and 2 washers)
M4x6 - 4 units
M4x20 - 3 units
M4x25 - ..
20.00€ 5.75€
Ex Tax:4.75€
-73 %
Stock: In Stock
Model: P3Steel_HTA3D_HardwareSet
P3Steel by HTA3D Nuts and Bolts:Screws:M3x8 - 14 unitsM3x12 - 64 unitsM3x16 - 7 unitsM3x20 - 4 unitsM3x25 - 8 unitsM3x30 - 8 units + 1 fully threadedM3x35 - 1 unit (with spring and 2 washers)M4x6 - 4 unitsM4x20 - 3 unitsM4x25 - 9 un..
20.00€ 5.35€
Ex Tax:4.42€
-40 %
Stock: In Stock
Model: Prusa i3 Rework-Tornillería
Prusa i3 Rework Nuts and Bolts:
Bolts:
41 x M3x14
3 x M3x24
4 x M3x30
6 x M4x20
1 x M8x30
Washers:
53 x M3 (12 x DIN 9021)
6 x M8
34 x M10 (4 x DIN 9021)
Nuts:
33 x M3
..
20.00€ 12.00€
Ex Tax:9.92€
-38 %
Discontinued
Stock: Discontinued
Model: Wilson-Tornillería
WILSON NUTS AND BOLTSComposition: -51x M5x8-51x M5 T Slot Nuts -4x M5 T Slot Nuts (They can be inseted after the mounting)-2x M5 Nuts-7x M4x20 + 7x M4 Nuts-11x M3x10-24x M3x14 (Black and allen)-10x M3x30-18x M3 Nuts -13..
29.99€ 18.50€
Ex Tax:15.29€
Only a few units in stock
-24 %
Stock: In Stock
Model: PA-GF20-FR-1.75mm-SAKATA3D
SAKATA 3D PA-GF20-FR filament is a 3D printing material specifically developed for automotive and industrial applications.It is composed of a copolyamide (Nylon) reinforced with 20% fiberglass and thermally stabilized, which allows excellent resistance and durability. In addition, it incorporates a ..
45.90€ 34.90€
Ex Tax:28.84€