S6 V2.0 Fysetc Board 32 bits - STM32F446 180Mhz CPU - 12v/24v compatible

Actual Version: 2.1

The S6 board is based on the STM32F446 32bit mcu has six drive sockets and supports the full range of TMC drives. They have fully extended the resources of the MCU so that you can maximize its power. They considered the possible use scenarios of 3D printers and designed a series of extended applications, such as anti-reverse circuit, 12V power supply, thermocouple support, 24V sensor support and so on.

Features:

• Compact size: 117mm x 87mm
• Based on STM32F446 180Mhz, all IOs can withstand 5V voltage
• 6 TMC stepper drivers support, no need wire Uart/SPI
• Improved TMC jumper settings: simpler and easier to understand
• Main power reverse protection circuit: safer
• 28V input max, 12V@5A, 5V@2ADC-DC circuit, 3.3V@0.6A LDO
• Two car fuses for hot bed input and main power input
• Limit switch socket 24V/5V/3.3V optional
• MX2.56 or NX2.56 connector
• 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
• 3pin temperature header, you can use thermistor or thermocouple (requires AD597 module)
• 3 ways PWM fans, 2 ways RGB led, 12V & 24V optional
• Easy DISPLAY + SD-CARD connector
• RepRapDiscount SmartController compatible pin header on board
• 10P FPC for Serial Touch display
• 2X4 PinHeader Out for SD Card moudle
• EXP1 & EXP2 have more multiplexing functions, such as USART, I2C, CAN
• SD card & USB upload support

More info

• Wiki Fysetc
• 3Dwork