PT100 temperature sensor - detachable 4-wire - high temperature and precision
13.99€
Tax 11.56€
- Stock: 9
- Model: PT100-4wire
PT100 temperature sensor for high temperature and high accuracy, to be used in place of a thermistor or thermocouple. They are capable of measuring higher temperatures than thermistors (up to 400ºC), and are more accurate than thermistors and thermocouples in general.
It can be used with Hotend V6 using the PT100 version heating block.
Made with fiberglass high temperature sleeving and cable protector.
PT100 | PT1000 | |
Precision | High | Medium |
Needs adapter board | Yes | No |
Susceptible to interference | Somewhat | No |
Temperature limit | Up to 430ºC depending on type | Up to 430ºC depending on type |
Special considerations | For best accuract, with 4-wire connection | Resolution less than PT100. No additional electronics required. However, to unlock your full resolution you need to change the 4.7k ohm resistor included on most boards to install the 1k resistor instead. In addition, the firmware configuration must be updated, depending on the installed sensor and resistance. |
100% Customers recommend this product
-
5 Awesome100%
-
4 Great0%
-
3 Average0%
-
2 Bad0%
-
1 Poor0%
Reviews Over PT100 temperature sensor - detachable 4-wire - high temperature and precision
- (5)
Total Reviews (1)
click here write review to add review for this product.
Report this review.
Tags: temperature,
sensors,
spares,
for,
hotend,
trianglelab