MKS Monster8 V2 32-bit - 3D printer board - for Voron
46.99€
Tax 38.83€
- Stock: 1
- Model: Monster8-V2-MKS
Model:
Monster8 V2
Pay in three interest-free installments with PayPal. 0% APR.
MKS Monster8 V2 is an upgraded version of Monster8 V1. On the basis of retaining the functions of the original V1, has added independent DV5V for the Raspberry Pi, has reserved Robin WIFI interface for RRF firmware, added more protection circuits and reserved more functional interfaces.
Specs:
- MCU: STM32F407VET6. Main frequency: 168MHz. Flash: 512KB. RAM: 192KB.
- Mainboard integrated 4KB EEPROM.
- Support different LCD: EXP1 and EXP2 connection.
- Added WIFI module slot.
- DC5V power supply designed for Raspberry Pi.
- Added MAX31865 temperature measurement interface.
- Support LCD to read U disk, and LCD interface to display U disk files.
- TypeC online serial port, and support to update bootloader and firmware.
- Counter electromotive force.
- Mos circuit with Schottky diode protection.
- Endstop circuit with Schottky diode protection.
- Temperature measurement circuit with Schottky diode protection.
Comparation of Monster8 V1 and Monster8 V2:
Monster8 V1 | Monster8 V2 | |
Fuse | SMD | Pluggable |
External step signal | No | Yes |
MOS circuit protection | Resistor protection | Resistor + Schottky diode protection |
Endstop circuit protection | Resistor protection | Resistor + Schottky diode protection |
Temp circuit protection | Resistor protection | Resistor + Schottky diode protection |
Motor back electromotive force | No | Absorbed by resistors of phase sequence |
PA13 pin | For X+ | For MT_DET |
PC5 pin | For Y+ | For Neopixel |
E4_EN signal | PD14 | Same as E0_EN = PB6 |
Robin Wifi interface | No | Yes |
MAX31865 | No | Yes, same as E4 axis signal |
Raspberry pi power | No | Independent DC5V/3A power |
Endstop power | Can be selected 5V or VIN | Only Z+ can be selected 5V or VIN, other endstop are 5V |
More info here.
0% Customers recommend this product
-
5 Awesome0%
-
4 Great0%
-
3 Average0%
-
2 Bad0%
-
1 Poor0%
Reviews Over MKS Monster8 V2 32-bit - 3D printer board - for Voron
- (0)
Total Reviews (0)
click here write review to add review for this product.
Report this review.
Tags: boards,
electronic,
mks