MK3 ALU Hot Bed 400x400mm 24V - With countersunk holes for screw head and With ready connection

The MK3 Aluminum Heated Bed is a high-quality platform designed for 3D printers that offers fast and even heating. With dimensions of 400x400 mm and a 3 mm aluminum core, this heated bed is ideal for large and demanding projects.

Key Features:

• Dimensions: 400x400 mm, suitable for large format prints.
• Aluminum Core: 3 mm thick, providing even and rapid heat distribution.
• Voltage: Designed to operate with a 24V power supply.
• Countersunk Holes: The screw head holes are countersunk so the screws do not protrude, ensuring a flat printing surface. The lower part measures 3.4 mm and the upper part 7 mm.
• Hole Spacing: 350 mm.
• Printing Surface: The metal part is the top printing surface, while the black side is the bottom. It is recommended to insulate the bottom side with thermal insulation to improve efficiency.
• Prepared Connection: Comes with a 100K thermistor included and the power cable prepared with a connector, making installation easy.
• Copper Layer: Features a 35μm copper layer, improving thermal conductivity.
• Maximum Temperature: Can reach up to 180ºC, suitable for most printing materials.
• Power: Approximately 260W, ensuring fast heating.
• Cable Length: Approximately 90 cm, sufficient for convenient connection.
• Weight: 1647g.