Hotend Phaetus Rapido 2 - HF - high flow

• One-piece copper alloy design faster thermal conductivity: Cylindircal melting zone for copper alloys. Evenly heated thanks to cylindrical ceramic heating element.
• Heatsink: The thin-walled surgical-grade stainless steel heat breaker: three titaniym screws make the entire structure more robust.
  Aluminium heatsink: ultra-thin metal wall.
  Titanium allow screws: 1.5mm bolt circle diameter
  Thin-walled Heatbreak
• High-Flow and High-Speed.
• High Heater capacity: High power cylindrical ceramic heating element up to 115W.
  24ºC-280ºC less than 51 seconds.

Two versions of the Rapido Plus Hotend:

1. Rapido Plus Hotend HF (High Flow) (This article version): 
   The HF version of the Rapido Plus Hotend is equipped with one plated copper nozzle and one hardened steel nozzle (both 0.4 mm / 1.75 mm).
   Print Flow between 20-30 mm³/s
2. Rapido Hotend Plus UHF (Ultra High Flow):
   The UHF version of the Rapido Plus hotend is equipped with a plated copper (0.4 mm) and a Volcano mouthpiece (0.6 mm).
   The unique hotend and nozzle design allows quick switching between high-flow and ultra-high-flow nozzles.
   Print Flow between >30 mm³/s. Up to 75 mm³/s.

Contains:

• Rapido-hotend Pre-assembled x1
• Groove Mount Adapter x1
• M2.5x5 screws x4
• M2.5x8 screws x4
• Tube Collet with Clips x2
• T-V6 Plated Copper Nozzle 0.4 x1
• Hexagon Wrench kit x1
• HF Silicone Sock x1
• Thermistor extension cable x1
• Heater extension cable x1