Stock: In Stock
Model: RigidoManga-5x8
Clamping rigid coupler Shaft from 5mm to 8mm, commonly used for Z axis. Made of a light, anti-oxidant, and anti-corrosive aluminium alloy. AcccurateNC cut with outstanding appearance, high precision fine workmanship. Provides torque transmision and alignment.Dimensions:Material: Aluminium Input..
1.50€
Ex Tax:1.24€
New
Stock: In Stock
Model: ResistenciaPlana-24V-48W
Flat heating cartridge, compatible with Bambu Lab X1 / X1C / P1P.Specifications:Voltage: 24VPower: 48WResistance size: 15x7mm approx.Resistance 11-14 ΩLength: 120mmConnector: XH2.54..
5.80€
Ex Tax:4.79€
New
Stock: In Stock
Model: Kit-ceramico-K1
Ceramic Heater Block Kit, with Resistor and Thermistor, Compatible with Creality K1 and K1 MAX.Features:60W Ceramic Heating Ring: Provides faster and more uniform heating with more efficient heat transfer. The hot melt section is enlarged and reaches a length of up to 28.5mm, allowing high-speed pri..
11.60€
Ex Tax:9.59€
New
Stock: In Stock
Model: Polea-doble-E-C
Dual Gear Extruder SetCompatible with:Creality K1, K1 Max, K1C V3, and V3 PlusKey Features:Nickel Plating: Made with nickel-plated and DLC-coated gears, this set prevents oxidation, extending the lifespan of the gears and enhancing lubrication.High Hardness: Heat-treated to achieve a surface hardnes..
7.50€
Ex Tax:6.20€
New
Stock: In Stock
Model: Nozzle-A1-0.4
Hardened Steel Nozzle, Compatible with Bambu Lab A1 Mini 3D PrintersFeatures:Strong Thermal Conductivity and Higher Heat Resistance: The nozzle can withstand temperatures up to 450ºC, ensuring rapid heating and continuous printing with high-temperature materials. It also reduces oxidation reactions ..
1.45€
Ex Tax:1.20€
New
Stock: In Stock
Model: Nozzle-TZ-V6-0.3
Hardened Steel Nozzle for TZ-V6 Hotend.Features:Strong Thermal Conductivity and Higher Heat Resistance: The nozzle can withstand temperatures up to 450ºC, ensuring rapid heating and continuous printing with high-temperature materials. It also reduces oxidation reactions at high temperatures, resulti..
1.45€
Ex Tax:1.20€
New
Stock: In Stock
Model: Nozzle-TZ-V6-0.4
Hardened Steel Nozzle for TZ-V6 Hotend.Features:Strong Thermal Conductivity and Higher Heat Resistance: The nozzle can withstand temperatures up to 450ºC, ensuring rapid heating and continuous printing with high-temperature materials. It also reduces oxidation reactions at high temperatures, resulti..
1.45€
Ex Tax:1.20€
New
Stock: In Stock
Model: Nozzle-TZ-V6-0.6
Hardened Steel Nozzle for TZ-V6 Hotend.Features:Strong Thermal Conductivity and Higher Heat Resistance: The nozzle can withstand temperatures up to 450ºC, ensuring rapid heating and continuous printing with high-temperature materials. It also reduces oxidation reactions at high temperatures, resulti..
1.45€
Ex Tax:1.20€
New
Stock: In Stock
Model: Kit-Bloque-Kobra3
Heater Block Kit, with Coil and Thermistor, Compatible with Anycubir Kobra3.Features:Throat Material: Bimetal.0.4mm Copper Nozzle.Weight: 24.4g.Includes:ThroatHeater BlockNozzleInsulation SockResistorThermistor(as shown in the picture)..
12.70€
Ex Tax:10.50€
Stock: In Stock
Model: V6-Heater-Block-PT100
The v6 Heater Block has been upgraded to clamp both the
heater cartridge and thermistor firmly in is place. These design improvements
improve the thermal response of the Hotend and make thermistor assembly easier.
This product also comes with the following fixings:1pc with M3x0.5x3 to clam..
0.90€
Ex Tax:0.74€
-27 %
Stock: In Stock
Model: HGX-Lite
The HGX-LITE extruder is designed to provide exceptional power and precision for your 3D printer. With a 9.5:1 gear ratio, this extruder can instantly deliver superpower, with an extraction force exceeding 60N.Compatible with Creality, Ender3 V2, CR10 CR 10S and VORON.Key Features:9.5:1 Gear Ratio: ..
28.50€ 20.69€
Ex Tax:17.10€
New
Stock: In Stock
Model: Calcetin-TZ-V6
Silicone sock for TZ-V6 hotend, its main advantages that keeps the nozzle clean and helps maintain temperature.Features:Manufactured from a non-stick silicone material, heat resistant, it will repel the accumulation of molten plastic. What helps with sticky materials and materials that tend to accum..
0.85€
Ex Tax:0.70€