Stock: In Stock
Model: Prusai3-WoodFrame-Rods
Composition:
2x 492mm M8 threaded rod
4x 180mm M8 threaded rod
2x 495mm Ø8mm Smooth rod
2x 470mm Ø8mm Smooth rod
2x 420mm Ø8mm Smooth r..
25.00€
Ex Tax:20.66€
Stock: In Stock
Model: PT100-4wire
PT100 temperature sensor for high temperature and high accuracy, to be used in place of a thermistor or thermocouple. They are capable of measuring higher temperatures than thermistors (up to 400ºC), and are more accurate than thermistors and thermocouples in general.It can be used with Hotend V6 us..
13.99€
Ex Tax:11.56€
Out of Stock
Stock: Out of Stock
Model: SensorTemp-PT100
PT100 temperature sensor for high temperature and high accuracy, to be used in place of a thermistor or thermocouple. They are capable of measuring higher temperatures than thermistors (up to 300ºC), and are more accurate than thermistors and thermocouples in general.Note that this is not a thermist..
9.99€
Ex Tax:8.26€
Stock: In Stock
Model: SensorTemp-PT1000
High temperature PT1000 temperature sensor.They are capable of measuring higher temperatures than thermistors (up to 400-450ºC, compared to 300ºC for the thermistor), and are more accurate than thermistors and thermocouples in general.PT1000 sensors can directly replace your printer thermistors with..
11.45€
Ex Tax:9.46€
New
Stock: In Stock
Model: HGX-Lite-hardwareSet
Pulley and hardware set for the HGX-lite extruder.The HGX-LITE extruder is designed to provide exceptional power and precision for your 3D printer. With a 9.5:1 gear ratio, this extruder can instantly deliver superpower, with an extraction force exceeding 60N.Compatible with Creality, Ender3 V2, CR1..
13.25€
Ex Tax:10.95€
Stock: In Stock
Model: R4-Fysetc
R4 Board designed to be used in Voron 0 3D printers.Characteristics:Small and compact board, size 86x48mmFour layer PCB.Trabaja con Raspberry PI Arm Cortex-M0.MCU RP2040.Fuse easy to remove in case you need to change it.Communication type C.Works at 12 or 24 V.Logic voltage: 3.3 V.Controller: TMC220..
44.50€
Ex Tax:36.78€
Stock: In Stock
Model: Linear-Guide-MGN12
MGN12 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriag..
14.50€
Ex Tax:11.98€
Stock: In Stock
Model: Linear-Guide-MGN15
MGN15 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriag..
16.50€
Ex Tax:13.64€
Stock: In Stock
Model: Linear-Guide-MGN7
MGN7 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriage..
7.30€
Ex Tax:6.03€
Stock: In Stock
Model: Linear-Guide-MGN9
MGN9 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriage..
13.50€
Ex Tax:11.16€
Stock: In Stock
Model: RAMPS1.4
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design includes connectors for the stepper mortos and controll electronics on a shield Arduino MEGA for easy maintenance. LCD and other parts can be a..
6.99€
Ex Tax:5.78€
Stock: In Stock
Model: RAMPS1.5
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design includes connectors for the stepper mortos and controll electronics on a shield Arduino MEGA for easy maintenance. Ramps 1.5 is optimized based..
7.50€
Ex Tax:6.20€