Stock: In Stock
Model: HB-fysetc-220x220-24v
Features:Rated voltage: 24VIncludes strong neodymium magnets that do not lose properties up to 140ºC4 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorFast and uniform heatingIt may present some superficial scratches as it has been manipulated for the welds..
45.99€
Ex Tax:38.01€
Out of Stock
Stock: Out of Stock
Model: HB-fysetc-300x300-24v
Features:Rated voltage: 24VIncludes strong neodymium magnets that do not lose properties up to 140ºC4 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorFast and uniform heatingNominal resistance: 1.6 ohmsNominal power 360WMounting hole spacing: 240mm for M4 ..
56.99€
Ex Tax:47.10€
Only a few units in stock
-20 %
Stock: In Stock
Model: Manta-4MP
Version: 2.2Functions and application:Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0BORE chip, more stable and faster.Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4, definitely, CB1. Also, a screw-reinforced installation is also av..
69.99€ 55.99€
Ex Tax:46.27€
Only a few units in stock
-22 %
Stock: In Stock
Model: Manta-8MP
Version: 1.1Functions and application:Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0B1VET6 chip, more stable and faster.Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also a..
89.99€ 69.99€
Ex Tax:57.84€
Stock: In Stock
Model: Manta-8MP-V2
Version: 2Functions and application:Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32H723ZET6 550MHzchip, more stable and faster.Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is al..
75.99€
Ex Tax:62.80€
Stock: In Stock
Model: Tuerca ajuste M3
This nut is used to facilitate manual leveling of the hot bed, since only the nut needs to be turned to tighten or loosen the screw.Specifications:Larger diameter: 10.75 mmWidth: 6.10 mmFor M3 screwMinimum order: 4 units1 unit..
0.11€
Ex Tax:0.09€
Stock: In Stock
Model: Base Adhesiva Antiwarping
This is a tough thin plastic film that adheres to the printing base or hot bed.It is designed with a special material in which the printed pieces adhere very tightly, plus its finely rough texture helps. Once the printing is finished, the piece is removed without leaving any residues or marks. No la..
3.15€
Ex Tax:2.60€
Out of Stock
Stock: Out of Stock
Model: MAX31865
Features:Better accuracy temperaturaCompact and easy assembly. Note: It supports the motherboard with the jumpers being setting in SPI mode and replaceable drivers.Supports connection with BIGTREETECH PT100/PT1000.Note: It can connect 2/4-wire PT100/PT1000 by default.Support multiple modules (l..
11.50€
Ex Tax:9.50€
Stock: In Stock
Model: MAX31865-V2
MAX31865 V2.0 temperature detector module. This module uses the MAX31865 chip.High temperature precision.Compact and simple mounting, it uses the same connection as the motor drivers.Support connection with PT100 / PT1000, 2/3/4 wires.It uses VCCIO as part of the power supply.Supports 3.3V and 5V po..
10.90€
Ex Tax:9.01€
Stock: In Stock
Model: Final de Carrera mecánico
The mechanical endstop is a sensor designed to detect the position or limit of movement of a mobile component in various devices and machines. This model includes a 70 cm cable and a 3-pin connector, making installation and connection easy.Mechanical endstops are commonly used in 3D printers, CNC ma..
0.99€
Ex Tax:0.82€
Out of Stock
Stock: Out of Stock
Model: FC Con Rueda 1m de cable
The mechanical endstop is a sensor designed to detect the position or limit of movement of a mobile component in various devices and machines. This model includes a 1m cable and a 3-pin connector, making installation and connection easy.Mechanical endstops are commonly used in 3D printers, CNC machi..
1.39€
Ex Tax:1.15€
Stock: In Stock
Model: FC Con Rueda-70cm cable
The mechanical endstop is a sensor designed to detect the position or limit of movement of a mobile component in various devices and machines. This model includes a 70cm cable and a 3-pin connector, making installation and connection easy.Mechanical endstops are commonly used in 3D printers, CNC mac..
1.10€
Ex Tax:0.91€