Out of Stock
Stock: Out of Stock
Model: Cristal bor- 3mm 220x280
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
11.99€
Ex Tax:9.91€
Out of Stock
Stock: Out of Stock
Model: Cristal bor- 3mm 300x200
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the
heater cartridge a..
4.85€
Ex Tax:4.01€
Stock: In Stock
Model: Inserto-M3
Brass (copper alloy) insert nuts, are especially suitable for thermoplastic materials.Threaded inserts are designed to provide strong permanent threads in thermosets and other hard plastics and are commonly used on plastic parts.They are commonly used in 3D printers, such as Voron.Material: Brass, w..
0.26€
Ex Tax:0.21€
Stock: In Stock
Model: Inserto-M4
Brass (copper alloy) insert nuts, are especially suitable for thermoplastic materials.Threaded inserts are designed to provide strong permanent threads in thermosets and other hard plastics and are commonly used on plastic parts.They are commonly used in 3D printers, such as Voron.Material: Brass, w..
0.31€
Ex Tax:0.26€
Stock: In Stock
Model: Inserto-M5
Brass (copper alloy) insert nuts, are especially suitable for thermoplastic materials.Threaded inserts are designed to provide strong permanent threads in thermosets and other hard plastics and are commonly used on plastic parts.They are commonly used in 3D printers, such as Voron.Material: Brass, w..
0.34€
Ex Tax:0.28€
Stock: In Stock
Model: BTT-CB1
Version: 2.2CB1 outputs signals to the motherboard through the micro BTB two-pin connection, including 100M Ethernet, HDMI, etc. Also, built-in 2.4G Wi-Fi. With its powerful 64-bit ARM Quad Core processor and 1 GB of DDR3 RAM, it has enough power to run Klipper, Linux or Debian.Compatible with Manta..
36.75€
Ex Tax:30.37€
Stock: In Stock
Model: BTT-CB2
The CB2 V1.0 is a powerful Klipper board based on the Rockchip RK3566 processor, supporting versatile expansions. This next-generation board offers optimized processing and storage performance, allowing 3D printer users to handle printing jobs quickly and efficiently.Powerful Processor:The quad-core..
53.50€
Ex Tax:44.21€
Stock: In Stock
Model: BTT Micro Probe
Main features:Ultra small, fits into more places.Lighteweight desing.Easy installation.Compatible with wide range of FDM printers.High precision and reliability.Specifications:Name: MicroProbe.Total weight: 6g.Voltage: 5V.Standard-By current: 19mA.Operating Current: 350mA.Cable Length: 1.5m.Wiring: ..
24.99€
Ex Tax:20.65€
Stock: In Stock
Model: BTT-PiV2
Version: 1.0BIGTREETECH Pi2 V1.0 is a powerful Klipper board based on the Rockchip RK3566 processor, supporting versatile expansions. This next-generation board offers optimized processing and storage performance, enabling 3D users to process print jobs quickly and smoothly.BIGTREETECH Pi 2 & CB..
69.99€
Ex Tax:57.84€
Out of Stock
Stock: Out of Stock
Model: BTT-Pi
Version: 1.2Features:Strategic Partnership KLIPPER and BIGTREETECH - The cooperation between KLIPPER and BIGTREETECH makes firmware for 3D printing enthusiasts more convenient to use and helps to further enhance the printing experience.Efficient and Powerful - 64-bit Quad-Core Architecture │ ARM®Cor..
34.99€
Ex Tax:28.92€
-14 %
Out of Stock
Stock: Out of Stock
Model: BTT02-V1.0
The BTT02 V1.0 board is a versatile board, which can be used as a replacement for the Prusa I3 MK3S printer board (Einsy Rambo board).Specifications:Microprocessor: 168MHz ARM Cortex-M4 CPU with STM32F407VGT6 chipVoltage: 12 / 24VLogic voltage: 3.3VMotor Drivers: 5 (including double Z)Engines: XM, Y..
69.99€ 59.99€
Ex Tax:49.58€