Black Friday
-11 %
Stock: In Stock
Model: Rod-D10
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
2.70€ 2.40€
Ex Tax:1.98€
Black Friday
-9 %
Stock: In Stock
Model: Rod-D12
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
4.95€ 4.50€
Ex Tax:3.72€
Black Friday
-21 %
Stock: In Stock
Model: Rod-D8
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
1.90€ 1.50€
Ex Tax:1.24€
Black Friday
-11 %
Stock: In Stock
Model: LeadScrew-T8x8
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 8mm 1 Piece ..
3.75€ 3.33€
Ex Tax:2.75€
Stock: In Stock
Model: LeadScrew-T8x2
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 2mm 1 Piece ..
3.85€
Ex Tax:3.18€
Stock: In Stock
Model: 5x5-Zcoupler
This flexible coupler is perfect for connecting motors and spindles on the Z-axis of 3D printers. Designed to absorb slight misalignments, improve accuracy and reduce wear.Features:Material: Strong and lightweight aluminum.Input and output diameter: 5 mm.Dimensions: 25 mm in length and 20 mm in diam..
1.35€
Ex Tax:1.12€
Stock: In Stock
Model: Rigid-5x5
Rigid Coupler Shaft from 5mm to 5mm, commonly used for Z axis. Material: Aluminium Input and Output: 5mm Lenght: 25 mm Diameter: 14 mm 1 Piece ..
0.89€
Ex Tax:0.74€
Stock: In Stock
Model: RigidoManga-5x8
Clamping rigid coupler Shaft from 5mm to 8mm, commonly used for Z axis. Made of a light, anti-oxidant, and anti-corrosive aluminium alloy. AcccurateNC cut with outstanding appearance, high precision fine workmanship. Provides torque transmision and alignment.Dimensions:Material: Aluminium Input..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: 5x8 Zcoupler
This flexible coupler is perfect for connecting motors and spindles on the Z-axis of 3D printers. Designed to absorb slight misalignments, improve accuracy and reduce wear.Features:Material: Strong and lightweight aluminum.Input and output diameter: 5 and 8mm.Dimensions: 25 mm in length and 20 mm in..
1.30€
Ex Tax:1.07€
Stock: In Stock
Model: Rigid-5x8
Rigid coupler Shaft from 5mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 5mm Output: 8mm Lenght: 25 mm Diameter: 14 mm 1 Piece ..
0.89€
Ex Tax:0.74€
Stock: In Stock
Model: 605zz Bearing
Bearings 605zz standard are used in 3d printers for Direct Drive extruders or axis movement Nominal dimensions: Inside diameter: 5mm Outside diameter: 14mm Thickness: 5mm 1 Piece ..
0.27€
Ex Tax:0.22€
Stock: In Stock
Model: 608ZZ
Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivatives, and also used for the tensors in X-axis and Y-axis. Speed: ABEC 5 For low speed applications such as extruders, idlers or tensioners, this model is not recommended for precision applications.N..
0.27€
Ex Tax:0.22€