Black Friday
-11 %
Stock: In Stock
Model: Rod-D10
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
2.70€ 2.40€
Ex Tax:1.98€
Black Friday
-9 %
Stock: In Stock
Model: Rod-D12
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
4.95€ 4.50€
Ex Tax:3.72€
Black Friday
-21 %
Stock: In Stock
Model: Rod-D8
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
1.90€ 1.50€
Ex Tax:1.24€
Black Friday
-11 %
Stock: In Stock
Model: LeadScrew-T8x8
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 8mm 1 Piece ..
3.75€ 3.33€
Ex Tax:2.75€
Stock: In Stock
Model: LeadScrew-T8x2
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 2mm 1 Piece ..
3.85€
Ex Tax:3.18€
Stock: In Stock
Model: Nut-T8x8-Copper
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Thread pitch: 8mm 1 Piece ..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Nut-T8x2-Copper
This copper nut is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Thread pitch: 2mm 1 Piece ..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Grasa-10g
Lubricating grease for maintenance of your 3D printer.Especially recommended for spindles.Material: GreaseType: LubricationSize: 10g..
1.49€
Ex Tax:1.23€
Out of Stock
Stock: Out of Stock
Model: MGN12C
It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriage mounting precautions:Assembly must be done very carefu..
8.75€
Ex Tax:7.23€
Stock: In Stock
Model: MGN12H
It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriage mounting precautions:Assembly must be done very carefu..
9.25€
Ex Tax:7.64€
Stock: In Stock
Model: MGN15C
It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriage mounting precautions:Assembly must be done very carefu..
10.75€
Ex Tax:8.88€
Out of Stock
Stock: Out of Stock
Model: MGN15H
It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that does not damage plastics. Before greasing, we recommend cleaning and drying them.Guide / Carriage mounting precautions:Assembly must be done very carefu..
11.75€
Ex Tax:9.71€