Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 8mm 1 Piece ..
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 2mm 1 Piece ..
Clamping rigid coupler Shaft from 5mm to 8mm, commonly used for Z axis. Made of a light, anti-oxidant, and anti-corrosive aluminium alloy. AcccurateNC cut with outstanding appearance, high precision fine workmanship. Provides torque transmision and alignment.Dimensions:Material: Aluminium Input..
Bearings 605zz standard are used in 3d printers for Direct Drive extruders or axis movement Nominal dimensions: Inside diameter: 5mm Outside diameter: 14mm Thickness: 5mm 1 Piece ..
Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivatives, and also used for the tensors in X-axis and Y-axis. Speed: ABEC 5 For low speed applications such as extruders, idlers or tensioners, this model is not recommended for precision applications.N..