Stock: In Stock
Model: Nozzle-coated-0.3
These nozzles perform the function of extruding melted plastic in the 3D printing process.The Teflon coating prevents filament from adhering to the tip.Features:Output tolerance: ±0.005 - 0.01mm.Roughness: <= Ra 0.2 / 3.2.High quality material.The inner wall is smooth and without blurrs.Sandblast..
2.29€
Ex Tax:1.89€
Stock: In Stock
Model: Nozzle-coated-0.4
These nozzles perform the function of extruding melted plastic in the 3D printing process.The Teflon coating prevents filament from adhering to the tip.Features:Output tolerance: ±0.005 - 0.01mm.Roughness: <= Ra 0.2 / 3.2.High quality material.The inner wall is smooth and without blurrs.Sandblast..
2.29€
Ex Tax:1.89€
Only a few units in stock
-8 %
Stock: In Stock
Model: Orbiter-V2
Orbiter V2.0 Extruder (1.75mm)The Orbiter V2.0 extruder gears are different from the V1.5 gears.Characteristics:Shorter drive gears: 11mm vs. 15mm.Strand gears hardenedWeight reduced to 135 grams approx.Smaller and more compact dimensions (11.6% shorter).The new motor design offers a ~40% increase i..
75.99€ 69.99€
Ex Tax:57.84€
Stock: In Stock
Model: Nozzle-1.75-PlatedCopper-0.4
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
6.50€
Ex Tax:5.37€
Stock: In Stock
Model: Nozzle-1.75-PlatedCopper-0.6
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
6.50€
Ex Tax:5.37€
Stock: In Stock
Model: HGX-Lite-hardwareSet
Pulley and hardware set for the HGX-lite extruder.The HGX-LITE extruder is designed to provide exceptional power and precision for your 3D printer. With a 9.5:1 gear ratio, this extruder can instantly deliver superpower, with an extraction force exceeding 60N.Compatible with Creality, Ender3 V2, CR1..
13.25€
Ex Tax:10.95€
-60 %
Stock: In Stock
Model: Teflón-4-1.9-red
Teflon tube with internal diameter 1.9mm, for 1.75mm filament.The inner walls of the tube are very smooth, which guarantees a high control over the flow.Due to its internal diameter of 1.9mm it is used for direct extruders, not recommended for use in bowden extruders.Features: It is made of pol..
6.00€ 2.40€
Ex Tax:1.98€
Stock: In Stock
Model: Aislante-Hotend
Rockwool Thermal insulation is used for heater block of the
Hotend, helping to maintain the temperature.
Thermal behavior
The structure of the rockwool contains dry and stable air
inside, which acts as a barrier to heat transfer characterized by its low thermal
conductivity, which i..
0.19€
Ex Tax:0.16€
Stock: In Stock
Model: Dual-Gears-5mm-ID
Double pulleys for bondtech extruders, this filament thrust system has proven to be one of the most powerful and reliable. By exerting force on the filament on both sides it is capable of transferring twice as much force as a single pulley, decreasing the possibility that the filament rests on the p..
6.15€
Ex Tax:5.08€
Recommended
FLASH
-20 %
Stock: In Stock
Model: Dual-Gears-5mm-ID-endurecida-niquel
Very high quality bondtech double pulley, they have been machined with extreme precision. The teeth are very sharp, which guarantees grip and does not slide easily.Made of hardened steel and then treated with nickel plating, which greatly improves the durability and reliability of the teeth.The bond..
14.99€ 12.00€
Ex Tax:9.92€
Stock: In Stock
Model: Sherpa-V1.5
FYSETC Sherpa V1.5 extruder.Small size Sherpa extruder, dual gear filament gripping system designed for use with any printer.It features a 6.25:1 gear-driven design to provide torque with near-silent operation. For best results it is recommended to adjust it for your printer.Using an SLS printed she..
47.50€
Ex Tax:39.26€
New
Stock: In Stock
Model: Silicona-Boquilla-A1
Keep your nozzle clean with this high-quality silicone brush. Designed for effective cleaning without damaging the nozzle.Material: High-quality silica gel, soft and safeHigh concentration: Enhanced cleaning efficiencyReusable and easy to cleanDoes not scratch the nozzleLong lifespan1 unit..
1.25€
Ex Tax:1.03€