Compact V6 heatsink, can be used for bowden or direct extruders.The internal diameter is 4.2mm, which allows a teflon tube to be inserted up to the throat, thus minimizing friction.Connections:M7 Bottom - Compatible with V6 style throats..
V6 Dual Heatsink compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be configured for two different temperatures on each end, so multiple materials can be printed. Easy leveling system for the nozzle. Light and com..
This version is more compact than the version V5.
The inner diameter is 4.2 mm, which allows to enter a teflon tube down
the throat, thereby minimizing friction.
Connections:
Bottom M7 - Compatible with throats style V6
Top designed to connect to the connector PC04-1
..
This version is more compact than the version v5.
The inner diameter is 4.2 mm, which allows to enter a Teflon tube until the nozzle, thereby minimizing friction.
Connections:
Bottom M6 - Compatible with V6 and V5 Heater Block
Top designed to connect to the connec..
This version is more compact than the version v5.
The inner diameter 4.2 mm, which allows you to enter a teflon tube down
the throat, thereby minimizing friction.
Connections:
Bottom M6 - Compatible with V6 and V5 Heater Block
Top designed to connect to the conne..
V6DM heatsink, compatible with V6 components.Features:Aluminum heatsink, lighter and more compact.Great heat dissipation.Compatible with V6 components, M7 thread.For top mounting use M2.5 screws not included...