Stock: In Stock
Model: 3010-12v-1m
Fan Specifications 3010 Size: 30x30x10mm Nominal Current: 0.08 ± 10% Amp Rated Voltage: DC12 V Noise: 24±10% dBA Fan Speed: 7000±10% RPM Air Flow: 3.45CFM Weight: 12.5 gLife: 35000 horas Cable lenght: 1m 1 Piece ..
2.99€
Ex Tax:2.47€
-29 %
Stock: In Stock
Model: 3010-24v-1m
Fan Specifications 3010 Size: 30x30x10mm Nominal Current: 0.08 ± 10% Amp Rated Voltage: DC24 V Noise: 24±10% dBA Fan Speed: 7000±10% RPM Air Flow: 3.45CFM Weight: 12.5 gLife: 35000 horas Cable lenght: 1m 1 Piece ..
3.50€ 2.50€
Ex Tax:2.07€
Out of Stock
Stock: Out of Stock
Model: 30A mosfet-module
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 30AVoltage: 5 / 12 / 24V
1 Piece
..
13.95€
Ex Tax:11.53€
Stock: In Stock
Model: Mosfet-30A-Fysetc
You can control the current intensity of devices or accessories, such as a hot bed, or different heaters.Factory testedMOSFET performance: maximum 280AExtra large heatsink, maximum current up to 30A1 unit..
13.25€
Ex Tax:10.95€
Stock: In Stock
Model: Spider3-Fysetc-X-Voron
Spider Board is a small but powerful 3D printer control board. In a limited space, it integrates 8 stepper motor drives, 5A 12V power supply, 8A 5V power supply, which provides powerful energy for fans of various voltages, various RGB light strips and Raspberry Pi. You can build a 3D printer with ri..
69.99€
Ex Tax:57.84€
Stock: In Stock
Model: DCDC5V-Module
DCDC power module that supplies power to the electronics 5V circuit.1 unit..
5.75€
Ex Tax:4.75€
Stock: In Stock
Model: Octopus
Octopus Board V1.1 from bigtree-tech.FeaturesCartridges Heater: 4Controllable fans: 6Normally Open Fans: 2MCU: STM32F446ZET6 114PinSD protocol: SDIOWi-Fi module interface: Special expansion interfaceCANBus: CANBus with RJ11 interfacePower: HB9500 9.5mm Pitch screw terminals (High current)Three group..
56.75€
Ex Tax:46.90€
Stock: In Stock
Model: Octopus-PRO-H446
Octopus Board H446 V1.1 from bigtree-tech.FeaturesCartridges Heater: 4Controllable fans: 6Normally Open Fans: 2MCU: STM32F446ZET6 114PinFrequency: 180MHzFlash: 512KSD protocol: SDIOWi-Fi module interface: Special expansion interfaceSoporte wifi module: ESP8266 (MAX500k7s(CANBus: CANBus with RJ11 int..
63.99€
Ex Tax:52.88€
Out of stock
Stock: Out of stock
Model: Octopus-PRO-H723
Octopus Board H723 V1.1 from bigtree-tech.FeaturesCartridges Heater: 4Controllable fans: 6Normally Open Fans: 2MCU: STM32H723ZET6 114PinFrequency: 550MHzFlash: 512KSD protocol: SDIOWi-Fi module interface: Special expansion interfaceSoporte wifi module: ESP8266 (MAX500k7s(CANBus: CANBus with RJ11 int..
65.99€
Ex Tax:54.54€
Stock: In Stock
Model: 3Dtouch
Automatic leveling system ideal for 3D printers. Lightweight, reliable and easy to install design, with a new version that incorporates a non-metallic probe and greater travel for greater versatility.High precision: Up to 0.005 mm, guaranteeing more accurate prints.Includes: 1 meter cable, connector..
13.99€
Ex Tax:11.56€
Stock: In Stock
Model: 3DTouch-Fysetc
Simple, light and precise automatic leveling system.Voltage: 5VCurrent: 15mAMaximum (Peak) Current: 300mAColor: Semitransparent Cable Length: 150mmWeight: 0.35 oz (10g)Wiring:3Pin: Brown(-,GND), Red(VDD),Yellow(control Signal)2Pin: Black(-,GND), White(Zmin)Includes the classic short cable and e..
14.99€
Ex Tax:12.39€
Out of Stock
Stock: Out of Stock
Model: 3DTouch-MKS
Simple, light and precise automatic leveling system.Includes the classic short cable and extension cable with DuPont connectors (and XH2.56 plug to change if desired).1 unit..
17.99€
Ex Tax:14.87€