Out of Stock
Stock: Out of Stock
Model: TFT50-BTT
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
75.99€
Ex Tax:62.80€
Stock: In Stock
Model: Fusible125ºC
Flat thermal fuseFuses are used to ensure the integrity of the electrical devices that are in the circuit, by not allowing the passage of high currents.Melting temperature: 125ºCVoltage: 250 VAmperage: 15A..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm-Dupont
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with dupont connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistorMaximum temperature 350ºC1 Piece..
1.10€
Ex Tax:0.91€
Stock: In Stock
Model: Termistor100K-PT100-3mm-XH
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with XH connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistorMaximum temperature 350ºC1 Piece..
1.15€
Ex Tax:0.95€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with dupont connector1 Piece..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado-XH
Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire with XH connector1 Piece..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Sensor-Prox-V
NPN NC Type Inductive Proximity Sensor TL-Q5MC2Specs:Rated operating voltage: 12/24VDetection distance: 5mmResponse time: less than 2msInductive object: MetalSupply voltage: 6/36V DCSize: 2.8x1.7x1.7cmCord length: 1.05m..
4.75€
Ex Tax:3.93€
Stock: In Stock
Model: TMC2130-SPI
Version V3.0Super silent drivers from Trinamic brand.Version for SPI, is designed for advanced users who know the Marlin firmware and want to test the new features.The special pins have output on the bottom and top, so you can configure the SPI using external wiring, or with the new plates as the Ra..
7.99€
Ex Tax:6.60€
-41 %
Stock: In Stock
Model: TMC2130-SPI-Fysetc
Version V1.2 FysetcSuper silent drivers from Trinamic brand.Version for SPI, is designed for advanced users who know the Marlin firmware and want to test the new features.The special pins have output at the bottom, so the SPI can be configured using the internal wiring on boards such as the SKR 1.4 ..
9.40€ 5.50€
Ex Tax:4.55€
Stock: In Stock
Model: TMC2130-STEP/DIR
Version: V3.0TMC2130 - Step / Dir are super silent drivers from Trinamic brand.This is the normal Plug and Play version, compatible with D4988 / DRV8825. You just have to configure Marlin with 16 micropasos, remove the three jumpers from the board and works perfectly.Includes 1 driver + 1 extra long..
7.99€
Ex Tax:6.60€
-52 %
Stock: In Stock
Model: TMC2208-Fysetc
Version 1.2Super silent drivers from Trinamic brand.Features:1.4A integrated power tube drive current2A maximum currentVoltage range 4.75V-36VMicrostep: 256/stepWith patented spreadCycle ™ technologyHigh chopper frequencyDcStep ™ post detection technologyCoolStep ™ dynamic current adjustment technol..
9.00€ 4.35€
Ex Tax:3.60€
FLASH
-22 %
Stock: In Stock
Model: TMC2208-UART-Bigtreetech
Version 3.0Super silent drivers from Trinamic brand.Version for UART, is designed for advanced users who know the Marlin firmware and want to test the new features.Includes 1 driver + 1 extra long heatsink.Links of interest:Github3DWork - Description and comparison1 unit..
4.25€ 3.30€
Ex Tax:2.73€