Stock: In Stock
Model: FundaNylon-1m
Braided mesh tube made of PET friendly to the environment.Features:Soft finish, easy to bend, elastic and easy to wire.It has good flexibility, resistance to high temperatures and fire, wear resistance , thermal insulation and UV protection. Inhibits chemical corrosionGood ventilation and diffusion ..
0.69€
Ex Tax:0.57€
Stock: In Stock
Model: Final de Carrera óptico
The optical endstop is a sensor designed to detect the position or limit of movement of a mobile component in various devices and machines. This model includes a 50 cm cable and a 3-pin connector, making installation and connection easy.Optical endstops are commonly used in 3D printers, CNC machines..
1.35€
Ex Tax:1.12€
Stock: In Stock
Model: Portable-Input-Shaper
With the Portable Input Shaper, the resonance of the axes can be measured by different axes to be later compensated by the printers.Features:Based on the popular RP2040 chip.Portable, you can use it on multiple 3D printers with Klipper firmware with the same configuration file.Small in size and easy..
14.99€
Ex Tax:12.39€
-20 %
Stock: In Stock
Model: CajaRamps-3DSteel
Printed part for the electronics that the 3DSteel printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic components remain inside and have space to lodge in an orderly manner the excess cable in case of needed.Material: PLA 3D850.You can optionally add th..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Stock: In Stock
Model: Caja-Electronica-3DSteel-V2
Printed part for the electronics that the 3DSteel V2 printer carries. Protects and assembles in the structure in an easy and safe way.All the electronic components remain inside and have space to lodge in an orderly manner the excess cable in case of needed.Material: PLA 3D850.You can optionally add..
7.50€ 6.00€
Ex Tax:4.96€
-20 %
Stock: In Stock
Model: Protector-fuente-3Dsteel
Printed protective part for the 33A power supply used by the 3DSteel printer.You can make the connections of the power supply and then place the printed pieces. Thanks to its design it is very easy to assemble and manipulate afterwards.It is designed to use the power outlet with switch, so that it w..
7.50€ 6.00€
Ex Tax:4.96€
-30 %
Stock: In Stock
Model: Eje-Y-3DSteel-V2
Printed parts for Y axis 3DSteel V2.Material: PETG.Contains:Belt holderStepper motor spacersLinear bearing supportIf you add the hardware kit it includes:2 M3x8 screws8 M3x12 screws2 M3x25 screws4 M3 self-locking washers8 self-locking nuts M32 M4x20 screws3 M4x25 screws2 M4 washers1 M4 self-locking ..
5.00€ 3.50€
Ex Tax:2.89€
Stock: In Stock
Model: R4-Fysetc
R4 Board designed to be used in Voron 0 3D printers.Characteristics:Small and compact board, size 86x48mmFour layer PCB.Trabaja con Raspberry PI Arm Cortex-M0.MCU RP2040.Fuse easy to remove in case you need to change it.Communication type C.Works at 12 or 24 V.Logic voltage: 3.3 V.Controller: TMC220..
44.50€
Ex Tax:36.78€
Stock: In Stock
Model: RAMPS1.4
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design includes connectors for the stepper mortos and controll electronics on a shield Arduino MEGA for easy maintenance. LCD and other parts can be a..
6.99€
Ex Tax:5.78€
Stock: In Stock
Model: RAMPS1.5
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design includes connectors for the stepper mortos and controll electronics on a shield Arduino MEGA for easy maintenance. Ramps 1.5 is optimized based..
7.50€
Ex Tax:6.20€
Stock: In Stock
Model: RAMPS1.6
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design includes connectors for the stepper mortos and controll electronics on a shield Arduino MEGA for easy maintenance. Ramps 1.6 is optimized and l..
10.75€
Ex Tax:8.88€
Recommended
Out of Stock
Stock: Out of Stock
Model: RAMPS1.6+
This version of the popular Ramps 3D printer electronics is a revision that integrates SPI compatibility, eliminating the need for extra wiring for the SPI pins.Main features:Compatible with SPI and SPEP / DIR, configurable through the jumpers integrated in the board.4-layer motherboard, improving o..
10.99€
Ex Tax:9.08€