Mechanical filament presence sensor, with a simple and effective design.Compatible with 5V and 3.3V.Includes 1m cable approx.Warning: It is important to see the connection diagram and connect it correctly, if it is connected incorrectly, the electronics can be damaged.It will be sent in white or bla..
Set of parts for the filament sensor for the Orbiter V2 extruder.Characteristics:Filament detectionAutomatic filament loadingFilament unload buttonThe filament entry ring is printed on a transparent material so that it is illuminated by a bi-color LED to show the status as follows:Red - no filament ..
Leveling sensor for 3D printers:It works by infrared, the sensor emits IR light and this bounces in the base of impression being identified by the sensor.Unlike resistive or capacitive sensors this sensor measures the separation distance on the upper surface of the hot bed, it does not need to be of..
Features:Better accuracy temperaturaCompact and easy assembly. Note: It supports the motherboard with the jumpers being setting in SPI mode and replaceable drivers.Supports connection with BIGTREETECH PT100/PT1000.Note: It can connect 2/4-wire PT100/PT1000 by default.Support multiple modules (l..
MAX31865 V2.0 temperature detector module. This module uses the MAX31865 chip.High temperature precision.Compact and simple mounting, it uses the same connection as the motor drivers.Support connection with PT100 / PT1000, 2/3/4 wires.It uses VCCIO as part of the power supply.Supports 3.3V and 5V po..
SFS V2.0 is a smart filament sensor that enhances 3D printing reliability by leveraging a highly accurate photoelectric sensor to detect problematic filament issues like runout, tying and clogging.Features Highlights:The SFS V2.0 is bi-directional, there is no restriction on filament direction, givi..
This filament sensor not only detects when the filament runs out, nut also it is able to detect a when the filament stops moving through a jam in the extruder.Works with Marlin 2+It is compatible with screens 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode).1 unit..
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with dupont connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistorMaximum temperature 350ºC1 Piece..
Thermistor ideal for the Hotend. 100K ohm NTC 3950 1m wire with XH connectorDurable 304 stainless steel capsuleDiameter 3mmDoes not need additional electronics (unlike a thermocouple)Greater precision than the normal thermistorMaximum temperature 350ºC1 Piece..