Stock: In Stock
Model: MK7
These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. Material: stainless steel ..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Mk8-175
These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. Material: stainless steel 1 Piece ..
0.65€
Ex Tax:0.54€
Only a few units in stock
-63 %
Stock: In Stock
Model: Mk8-300
These precision pulleys are designed especially for the extrusion
of the filament, its tiny teeth always guarantee a steady grip.
Material: stainless steel ..
3.49€ 1.30€
Ex Tax:1.07€
Stock: In Stock
Model: 3MOS-MKS
MKS 3MOS is a connection fan module. The module integrates 3 MOS control outputs, and its pins and dimensions are compatible with pluggable motor drive slots. It can be used directly by connecting to the drive slot and simply configuring the pin file. Suitable for motherboards with more than 5 axis ..
2.70€
Ex Tax:2.23€
Stock: In Stock
Model: Eagle-MKS
MKS Eagle is an integrated version of Nano V3.0. Features:Cortex-M4 with FPU 32-bit, 168 MHz. Flash: 512 KB. RAM: 192KB.Compatible with UBS disk printing and TF card printing.Supports Virtual USB Device function.Integrated 5 TMC2209 driver with UART mode.Integrated snap-on drive heat sink and a..
52.50€
Ex Tax:43.39€
Out of Stock
Stock: Out of Stock
Model: MKS-EMMC-8G
MKS EMMC-8G module and MKS EMMC-Adapter.The EMMC module is more stable and has faster read and write speed than using SD cards.For information about MKS Pi and the configuration click here.For information about MKS SKIPR and the configuration click here...
9.99€
Ex Tax:8.26€
Stock: In Stock
Model: MKS IPS50
MKS IPS50 motherboard is a 5 inch capacitive screen. The pixel is 800xRGBx480. It can be connected to MKS SKIPR, MKS Pi board by HDMI and Type C USB interface and also run Klipper screen.It has an integrated DC12-24V power supply interface.Specs:5 inch capacitive screen.Connections: HDMI, TypeC USBP..
47.99€
Ex Tax:39.66€
Stock: In Stock
Model: Monster8-V2-MKS
MKS Monster8 V2 is an upgraded version of Monster8 V1. On the basis of retaining the functions of the original V1, has added independent DV5V for the Raspberry Pi, has reserved Robin WIFI interface for RRF firmware, added more protection circuits and reserved more functional interfaces.Specs:MCU: ST..
46.99€
Ex Tax:38.83€
Stock: In Stock
Model: MKS-PI
Version: 1.1MKS PI is a high-end microcomputer board designed by Makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. The size, mounting holes, and most interface locations are also compatible with Raspberry Pi 3B. In terms of hardware, MKS PI h..
48.50€
Ex Tax:40.08€
Stock: In Stock
Model: MKS Pi_TS35
MKS PI_TS35 is a Makerbase 3.5-inch display developed for the MKS PI board or MKS SKIPR board.For information about MKS Pi and the configuration click here.For information about MKS SKIPR and the configuration click here...
19.99€
Ex Tax:16.52€
-13 %
Out of Stock
Stock: Out of Stock
Model: Sgen_L-MKS
Version V2.0MKS SGEN_L V2.0 es una potente placa de control de impresora 3D de 32 bits.CPU LPC1769 120MHZ de alta frecuencia y más velocidad de procesamientoEEPROM 4KB integradaConexión para eje Z dualCompatible con 12 V y 24VAdmite el modo UART, SPI y STEP / DIR.For more information click here...
38.00€ 33.00€
Ex Tax:27.27€
Stock: In Stock
Model: SKIPR
Version: 1.0MKS SKIPR is an all-in-one board launched by Makerbase for running Klipper. It integrates the RK3328 SOC running the Klipper host and the STM32F407VET6 MCU responsible for executing specific machine actions. It meets the use of most 3D printers.Features and advantages:SOC uses Rockchip's..
79.99€
Ex Tax:66.11€